TRANSPHORM AND ON SEMICONDUCTOR ANNOUNCE THE START OF PRODUCTION OF CO-BRANDED GAN POWER DEVICES

 

Charlotte, NC — March 16, 2015 — Transphorm Inc. today announced at APEC 2015, in partnership  with ON Semiconductor, the introduction of two co-branded 600V gallium nitride (GaN) cascode transistors and a 240W reference design that utilizes them. This introduction builds on the previously announced partnership between Transphorm Inc., Transphorm Japan Inc., and ON Semiconductor to bring GaN-based power solutions to market. With typical on-resistances of 150 and 290 mOhms, the two new GaN products, TPH3202PS (ON Semi equivalent: NTP8G202N) and TPH3206PS (ON Semi equivalent: NTP8G206N), are offered in an optimized TO-220 package for easy integration with customers’ existing circuit board manufacturing capabilities.
“At last year’s APEC 2014, the Transphorm booth displayed evaluation boards using our 600V TO-220 HEMTs. At this year’s show we’re excited to announce complete GaN-specific reference designs with ON Semiconductor,” said Primit Parikh, President and Co-Founder of Transphorm. “We have consistently demonstrated, since 2011, that our JEDEC-qualified 600V GaN products enable more efficient, compact and low-cost solutions than traditional silicon devices. With our partner, ON Semiconductor, we are providing complete reference design platforms and tools that enable designers to take advantage of GaN’s benefits while greatly accelerating their design cycles and reduce time to market.”
The two-stage evaluation board NCP1397GANGEVB (Transphorm equivalent: TDPS250E2D2) is offered as a complete reference design so that customers can implement GaN cascode transistors in their power designs. The evaluation board is representative of a production power supply that has been re-designed for smaller size and higher performance systems, and it highlights the capability and potential of GaN transistors in this power range. The boost stage delivers 98% efficiency and utilizes the NCP1654 power factor correction controller. The LLC DC-DC stage uses the NCP1397 resonant mode controller to offer a 97% full load efficiency. This performance is achieved while running at 200+ kHz and – impressively – is also able to meet EN55022 Class B EMC performance. Full documentation is available at the Transphorm and ON Semiconductor websites.
The Transphorm GaN HEMT devices are in mass production at the Fujitsu Semiconductor group’s CMOS-compatible, 150mm wafer fab in Aizu-Wakamatsu, Fukushima, Japan. The large-scale, automotive-qualified facility, which is providing exclusive GaN foundry services for Transphorm and its partners, will allow dramatic expansion of Transphorm’s GaN power device business to meet the growing customer demand.
Transphorm’s APEC Booth 1317 and ON Semiconductor’s Booth 407 will provide demonstrations of the GaN devices along with a new current mode LLC power supply and automotive motor driver.
 
About Transphorm
Transphorm is redefining electric power conversion, providing cost-competitive and easy-to-embed power conversion devices and modules that reduce costly energy loss by more than 50%, and simplify the design and manufacturing of motor drives, power supplies and inverters for solar panels and electric vehicles. From material technology and device fabrication to circuit design and module assembly, Transphorm designs and delivers its power conversion devices and modules to meet the needs of global customers. By creating an ecosystem of electrical systems manufacturers powered by Transphorm, the company accelerates the adoption of power devices and modules that pave the way for the next generation of electrical systems designed for optimal efficiency. To learn more about Transphorm, please visit transphormusa.com.
About ON Semiconductor
ON Semiconductor (Nasdaq: ONNN) is driving energy efficient innovations, empowering customers to reduce global energy use. The company offers a comprehensive portfolio of energy efficient power and signal management, logic, discrete and custom solutions to help design engineers solve their unique design challenges in automotive, communications, computing, consumer, industrial, LED lighting, medical, military/aerospace and power supply applications. ON Semiconductor operates a responsive, reliable, world-class supply chain and quality program, and a network of manufacturing facilities, sales offices and design centers in key markets throughout North America, Europe, and the Asia Pacific regions. For more information, visit http://www.onsemi.com.

 

Charlotte, NC — March 16, 2015 — Transphorm Inc. today announced at APEC 2015, in partnership  with ON Semiconductor, the introduction of two co-branded 600V gallium nitride (GaN) cascode transistors and a 240W reference design that utilizes them. This introduction builds on the previously announced partnership between Transphorm Inc., Transphorm Japan Inc., and ON Semiconductor to bring GaN-based power solutions to market. With typical on-resistances of 150 and 290 mOhms, the two new GaN products, TPH3202PS (ON Semi equivalent: NTP8G202N) and TPH3206PS (ON Semi equivalent: NTP8G206N), are offered in an optimized TO-220 package for easy integration with customers’ existing circuit board manufacturing capabilities.

“At last year’s APEC 2014, the Transphorm booth displayed evaluation boards using our 600V TO-220 HEMTs. At this year’s show we’re excited to announce complete GaN-specific reference designs with ON Semiconductor,” said Primit Parikh, President and Co-Founder of Transphorm. “We have consistently demonstrated, since 2011, that our JEDEC-qualified 600V GaN products enable more efficient, compact and low-cost solutions than traditional silicon devices. With our partner, ON Semiconductor, we are providing complete reference design platforms and tools that enable designers to take advantage of GaN’s benefits while greatly accelerating their design cycles and reduce time to market.”

The two-stage evaluation board NCP1397GANGEVB (Transphorm equivalent: TDPS250E2D2) is offered as a complete reference design so that customers can implement GaN cascode transistors in their power designs. The evaluation board is representative of a production power supply that has been re-designed for smaller size and higher performance systems, and it highlights the capability and potential of GaN transistors in this power range. The boost stage delivers 98% efficiency and utilizes the NCP1654 power factor correction controller. The LLC DC-DC stage uses the NCP1397 resonant mode controller to offer a 97% full load efficiency. This performance is achieved while running at 200+ kHz and – impressively – is also able to meet EN55022 Class B EMC performance. Full documentation is available at the Transphorm and ON Semiconductor websites.

The Transphorm GaN HEMT devices are in mass production at the Fujitsu Semiconductor group’s CMOS-compatible, 150mm wafer fab in Aizu-Wakamatsu, Fukushima, Japan. The large-scale, automotive-qualified facility, which is providing exclusive GaN foundry services for Transphorm and its partners, will allow dramatic expansion of Transphorm’s GaN power device business to meet the growing customer demand.

Transphorm’s APEC Booth 1317 and ON Semiconductor’s Booth 407 will provide demonstrations of the GaN devices along with a new current mode LLC power supply and automotive motor driver.

About Transphorm

Transphorm is redefining electric power conversion, providing cost-competitive and easy-to-embed power conversion devices and modules that reduce costly energy loss by more than 50%, and simplify the design and manufacturing of motor drives, power supplies and inverters for solar panels and electric vehicles. From material technology and device fabrication to circuit design and module assembly, Transphorm designs and delivers its power conversion devices and modules to meet the needs of global customers. By creating an ecosystem of electrical systems manufacturers powered by Transphorm, the company accelerates the adoption of power devices and modules that pave the way for the next generation of electrical systems designed for optimal efficiency. To learn more about Transphorm, please visit transphormusa.com.

About ON Semiconductor

ON Semiconductor (Nasdaq: ONNN) is driving energy efficient innovations, empowering customers to reduce global energy use. The company offers a comprehensive portfolio of energy efficient power and signal management, logic, discrete and custom solutions to help design engineers solve their unique design challenges in automotive, communications, computing, consumer, industrial, LED lighting, medical, military/aerospace and power supply applications. ON Semiconductor operates a responsive, reliable, world-class supply chain and quality program, and a network of manufacturing facilities, sales offices and design centers in key markets throughout North America, Europe, and the Asia Pacific regions. For more information, visit http://www.onsemi.com.

Back to news & events